iLevel-GW Nano Groundwater Datalogger
The iLevel-GW Nano is an absolute pressure groundwater data logger for measuring and storing water pressure and temperature. By means of a steel cable the iLevel-GW Nano is lowered in the water level pipe and fixed below the lowest water level. The ultra… Read more
Measuring Ranges |
|
Accuracy | Max. ±0.15 % FS (linearity best straight line at RT, hysteresis, repeatability) |
Long-term Stability | Typ. ±0.1 % FS, max. ±0.2 % FS (limited to max. ±3 mbar) |
Overload | 4 x pressure range |
Communication | Local: 433 MHz, license-free ISM radio |
Power Supply | Lithium batteries 1xAA Mignon (up to 10 years operating time or ~2 Mio measurements) |
Data Memory | 2 MB memory up to 150.000 measurement series, non-volatile, storage cycle freely-definable |
Operating Temperature Range | Operating range -5 °C (only in liquid media) to +80 °C |
Material | Stainless steel 316 L / 1.4435 |
Dimensions (Ø x H) | 24 mm x 210 mm |
Conformity / Compliance |
CE |
The iLevel-GW Nano is an absolute pressure groundwater data logger for measuring and storing water pressure and temperature. By means of a steel cable the iLevel-GW Nano is lowered in the water level pipe and fixed below the lowest water level.
The ultra low-power data logger records the measured values in adjustable measuring intervals with a runtime of up to 10 years (~2 million measurements). For data readout, the iLevel-GW Nano is pulled out of the measuring well and the data is conveniently read out via short-range radio using a laptop.
In the logger software (cloud application), the true water level is calculated from the recorded absolute water pressure and the barometric pressure. (Please note: The air pressure needed to calculate the water level is recorded with a barologger. Only one barologger is required for a measurement field.)
Operation
The iLevel-GW Nano, equipped with a sealed lithium battery, is optimized for low-power long-term use of up to 10 years and beyond. The data logger operates in a very low power mode and wakes up only for measurement or data readout by short-range radio.
The autonomously working iLevel-GW Nano continuously stores water pressure, water temperature, and battery condition.
- Made of stainless steel
- Dimensions optimized for insertion in pipes from 1“ upwards
- Up to 10 years maintenance-free operation
- Data readout via 433 MHz short-range radio
- Absolute pressure logger / barologger - same design
The iLevel-GW Nano is the ideal measuring device for measuring campaigns where quick and easy installation is important. The programmed data logger is lowered into the measuring well with a steel cable and is immediately ready for use.
- Groundwater: Water pressure, air pressure and water temperature recording
- Water level in surface waters: Especially to be used in flood-prone areas (moors, flood plains), where differential pressure probes stop their service in case of flooding as the differential pressure opening is blocked by the overflowing water.
-
iLevel-GW Nano Brochure