iLevel-GW IP-capable Groundwater LoggeriLevel-GW IP-capable Groundwater LoggeriLevel-GW IP-capable Groundwater LoggeriLevel-GW IP-capable Groundwater LoggeriLevel-GW IP-capable Groundwater LoggeriLevel-GW IP-capable Groundwater LoggeriLevel-GW IP-capable Groundwater Logger
iLevel-GW IP-capable Groundwater Logger

iLevel-GW IP-capable Groundwater Logger

Other models available
Request a quote or adviceAdded to Request List

iLevel-GW is an IP data logger designed for very low power data acquisition of level and temperature in groundwater and surface waters. The system can be easily expanded into a multi-channel monitoring device by adding optional sensors for water quality…  Read more

Brochure

Technical Specifications Data Logger
Input Channels
  • 24 channels, high-resolution
Communications
  • Remote: GPRS 2G or 3G; bi-directional
  • Local: 433 MHz, license-free ISM radio
Power Supply
  • Lithium batteries 3.6 V (up to 10 years of operation or up to 20.000 Internet transfers and 200.000 data logs per unit)
Data Storage
  • Internal memory for up to 250 k measurement entries, non-volatile
  • Storage cycle: freely-definable, minimum 2”
Material and Environmental Conditions
  • Enclosure: stainless-steel, ABS
  • Operating temperature range:    
    • Modem -30 °C to +85 °C    
    • Logger -40 °C to +85 °C
Dimensions: Diameter Ø, Length, Mass
  • 48.5 mm Ø,  411.5 mm length, 1,5 kg (without sensor)
Conformity/Compliance
  • CE


Technical Specifications Sensor
Measuring Range
  • Temperature: -25 °C to 85 °C with accuracy <= +/- 0.3 °C
  • Pressure: 0 - 10 mH2O with max. load 3 bar (further options on demand)
Resolution
  • Pressure 0.01 % FS; Water Temperature 0.05 °C
Material
  • Sensor: stainless steel 316 L / 1.4435 (titanium (GR. 2) optional)
  • Seals: viton (EPDM or Kalrez optional)
  • Cable: PUR (standard), PE (drinking water) or FEP (chemical resistant, Teflon impregnated)
Dimensions: Diameter Ø, Length, Mass
  • Typically 24 mm Ø, 157 mm length, 200 g (without cable)
Conformity/Compliance
  • CE

iLevel-GW is an IP data logger designed for very low power data acquisition of level and temperature in groundwater and surface waters. The system can be easily expanded into a multi-channel monitoring device by adding optional sensors for water quality monitoring. By default, an iLevel-GW comes with a coupled water level and water temperature sensor accurate to 0.1 % FS. The vented pressure sensors auto-compensate for atmospheric pressure and temperature variations providing a corrected reading at all times.

The iLevel-GW is a low-power and durable device (made from stainless steel and ABS) operating unattended for very long periods on batteries. It is equipped with highly precise yet robust high-tech electronics. Its dimensions are optimized for insertion into standard 2” boreholes (adapters for larger boreholes and mounting clamps available).

The iLevel-GW is equipped with a battery-operated autonomous IP data logger. The integrated data modem reports to the KISTERSdatasphere application.

Operation

The iLevel-GW is equipped with a GSM/GPRS quad-band module for worldwide compatibility (choice of 2G or 3G).

The device is perfectly suitable for battery operation: Low power components, innovative firmware, hibernation between samples and data transmissions, and the efficient M2M data protocol all contribute to saving battery power. The iLevel-GW monitors battery, storage, transfers, internal temperature and humidity, and signal strength to enable remote diagnostics. For preventive maintenance, these self-diagnostic parameters can trigger alarm SMS or emails.

  • Stainless steel enclosure
  • Long-term maintenance-free operation
  • Data security: data access via PIN only
  • Local and remote confi guration
  • Local and remote data downloading
  • Bi-directional data transfer, no data losses

  • Groundwater Monitoring: Rest Water Level (RWL), Pumped Water Level (PWL)
  • Surface Water Monitoring: Level and Quality (optional)
  • Water Quality Monitoring