TB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow GaugeTB1L/70 Dual Tipping Bucket Flow Gauge
TB1L/70 Dual Tipping Bucket Flow Gauge

TB0.5L/70 & TB1L/70 Dual Tipping Bucket Flow Gauge

Other models available
Request a quote or adviceAdded to Request List

HyQuest Solutions’ dual tipping bucket flow gauge TBL-70 is used for measuring water seepage coming out of a pipe or a drain. The unit is equipped with two distinct buckets to provide best accuracy over a large range of flows: a smaller bucket at the top of the…  Read more

Brochure
Material PVC plastic and stainless steel
Resolutions
  • Metal bucket, top of gauge: 70 ml, up to 6 L/minute
  • PVC bucket, bottom of gauge: 0.5 L or 1.0 L (selectable), up to 25 L/minute
Accuracy

0.5/1L bucket

Flow Rate (L/min) Error
0.5 -2 %
1.0 -6 %
5.0 -10 %
10.0 -14 %
15.0 -18 %
20.0 -20 %
25.0 -22 %

 70ml bucket

Flow Rate (L/min) Error
0.5-3.0 -3 %
3.0-6.0 -5 %
>6.0 NA
Signal Out
  • 2 X dual reed switch, one for each bucket
  • Protection: Mechanical: silicon rubber potting; Electrical: varistor surge protection
  • Max capacity: 24 VDC (0.5 amp max)
  • Resistance: Initial contact resistance 0.1 Ω
  • Maximum tipping bucket frequency: 108 to 109 tips
Flow Rate Maximum 25 L/minute
Level Bulls eye level adhered to stainless steel base
Environmental Conditions
  • Relative humidity: 0 to 95 % „
  • Temperature: -20 °C to +70 °
Dimensions & Mass
  • Base Length x Width: 390 x 235 mm (incl. mounting brackets)
  • Height: 468 mm (when 70 ml bucket installed); 390 mm (when 70 ml bucket removed)
  • Weight: 6 kg (packed 7 kg)

HyQuest Solutions’ dual tipping bucket flow gauge TBL-70 is used for measuring water seepage coming out of a pipe or a drain. The unit is equipped with two distinct buckets to provide best accuracy over a large range of flows: a smaller bucket at the top of the gauge to measure at low flows and a larger one at the bottom to measure at high flows. Each bucket is connected to its own dual reed switch effectively enabling redundant data acquisition in two distinct data loggers, or providing data to two devices (e.g. a data logger and a counting display), etc.

Operation

The two buckets operate simultaneously up to 6 L/minute. At low flows where the large bucket is not full to tip, more accurate results can be obtained from the small bucket’s reed switch output. At higher flows above 6 L/minute the smaller bucket at the top has to be removed by the user. Data is then generated solely by the larger bucket’s reed switch output.

  • Non-corrosive materials

  • Suitable for harsh environment

  • Accurate readings at low and high flows

  • 4 x M8 mounting brackets

  • Easily cleaned and little maintenance needed

     

The TBL-70 is suitable for all applications where a water flow out of a pipe or similar outlet needs to be supervised. This may include

  • Monitoring at basin outlets of any kind of industrial water, grey water or storm water retention basins
  • Sewer network injections into a collection basin
  • Drain output
  • Water discharge out of a treatment or intermittent storage basin
  • Pump testing